Merck 101145 Ammonium chloride for analysis EMSURE® ACS,ISO,Reag. Ph Eur 1 kg

Merck 101145 Ammonium chloride for analysis EMSURE® ACS,ISO,Reag. Ph Eur 1 kg
Catalogue Number	101145
Synonyms	Sal ammoniac

Physicochemical Information
Density	1.53 g/cm3 (25 °C)
Ignition temperature	>400 °C
Melting Point	338 °C (sublimed),(External MSDS)
pH value	5 – 5.5 (H₂O, 25 °C) (External MSDS)
Vapor pressure	1.3 hPa (30 °C)
Bulk density	600 – 900 kg/m3
Solubility	372 g/l (External MSDS)

Toxicological Information
LD 50 oral	LD50 Rat 1410 mg/kg

Safety Information according to GHS
Hazard Pictogram(s)
Hazard Statement(s)	H302: Harmful if swallowed. H319: Causes serious eye irritation.
Precautionary Statement(s)	P264: Wash skin thoroughly after handling. P280: Wear eye protection/ face protection. P301 + P312: IF SWALLOWED: Call a POISON CENTER/doctor if you feel unwell. P305 + P351 + P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P337 + P313: If eye irritation persists: Get medical advice/ attention. P501: Dispose of contents/ container to an approved waste disposal plant.
Signal Word	Warning
RTECS	BP4550000
Storage class	10 – 13 Other liquids and solids
WGK	WGK 1 slightly hazardous to water
Disposal	14 Inorganic salts: Container I. Neutral solutions of the these salts: Container D. Before placing in Container D, check the pH with pH-Universal indicator strips (Item No. 109535).

Safety Information
Categories of danger	harmful, irritant

Storage and Shipping Information
Storage	Store at +2°C to +30°C.

Specifications
Assay (argentometric)	≥ 99.8 %
Assay (argentometric; calculated on dried substance)	99.0 – 100.5 %
Identity	passes test
Appearance of solution	passes test
Insoluble matter	≤ 0.005 %
Acidity or alkalinity	passes test
pH-value (5 %; water, 25 °C)	4.5 – 5.5
Bromide, Iodide (Br,I)	passes test
Nitrate (NO₃)	≤ 0.0005 %
Phosphate (PO₄)	≤ 0.0002 %
Sulfate (SO₄)	≤ 0.002 %
Heavy metals (ACS)	≤ 0.0005 %
Ca (Calcium)	≤ 0.0005 %
Cu (Copper)	≤ 0.0002 %
Fe (Iron)	≤ 0.0002 %
K (Potassium)	≤ 0.005 %
Mg (Magnesium)	≤ 0.0005 %
Na (Sodium)	≤ 0.005 %
Ni (Nickel)	≤ 0.0001 %
Pb (Lead)	≤ 0.0001 %
Zn (Zinc)	≤ 0.0002 %
Loss on Drying (105 °C)	≤ 1.0 %
Residue on ignition (as sulfate)	≤ 0.01 %
Corresponds to ACS,ISO,Reag. Ph Eur

Reviews

There are no reviews yet.

Be the first to review “Merck 101145 Ammonium chloride for analysis EMSURE® ACS,ISO,Reag. Ph Eur 1 kg”